It is a device that measures the power generation performance of thermoelectric elements.
It is the device that calculates the optimum power generation power by setting the temperature of the high temperature part and the low temperature part.
Terms | TEGTEST-001A | |||
---|---|---|---|---|
Generals | Installation | In and out door | ||
Ambient Temp | -20 ~ 50 Celsius(℃) | |||
Humidity | 40 ~ 80 % RH | |||
Input Power | AC Free Volt (2 Phase AC 220) | |||
Temp Adjusr Range | Hot Side | 25℃ ~ 550 ℃ | ||
Cold Side | 0 ℃ ~ 50 ℃ | |||
Operation Methods | Auto, manual | |||
Tolerance | ± 0.1 ℃ | |||
Hot Side | Operation Voltage | AC 220 Volt / 60 Hz | ||
Operation Current | Below of 10 A | |||
Operation Power | Below of 2.2 Kwatt | |||
Cold Side | Operation Voltage | Below of DC 48V | ||
Operation Current | Below of DC 20 A | |||
Operation Power | Below of 1 kwatt | |||
Safety | Over Current Stopper | |||
High Temp Auto Fuse | ||||
System Details | Operation | Operation Signal | Operation | Yellow Colour Light |
Cooling Process | Green Colour Light | |||
Heating Process | Red Colour Light | |||
Hot Side Temp | Upper Number | |||
Cold Side Temp | Down Number | |||
Generation Voltage Marking | Up Of Display Pannel | |||
Generation Current Marking | Middle Of Display Pannel | |||
Generation watt Marking | Down Of Display Pannel | |||
Load resistance | Lefy of Display Pannel | |||
Temp Adjustment | Temp Sonser | PT 100 Ohm (Changable) | ||
Operation | manual | After Temp Setting all Auto process | ||
Others | Communication Port | 232/422/485 | ||
Others | System Colour | Ivory, yellow | ||
Dimension | Testing System | 300 x 400 x 200 mm (Changable) | ||
Controller | One Body with test System | |||
Weight | 15 Kg |